LORD® 403 acrylic adhesive in combination with LORD Accelerator 19 or 19GB can be used to replace welding, brazing, riveting and other mechanical fastening methods. These adhesives perform particularly well in low-temperature environments and applications that are subject to high impact or high peel loads. LORD acrylic adhesive provides a range of working times to accommodate a wide variety of process requirements.
LORD 403 acrylic adhesive, when mixed with LORD Accelerator 19 or 19GB, create adhesive systems that bond a wide variety of prepared or unprepared metals and engineered plastics. These adhesive systems are specifically formulated to provide the highest impact and peel strengths available in a room temperature curing adhesive.
LORD 403 glue comes in an off-white color and each bottle comes with 19GB accelerator
Temperature Resistant– performs at temperatures from -40°F to +300°F (-40°C to +149°C).
Envirnomentally Resistant– resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV
Non-Sag–remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.
UL Rated–when mixed with LORD Accelerator 19, adhesive system is UL 746C certified.
Surface Preparation–Remove grease, loose contamination or poorly adhering oxides from metal surfaces. Normal amounts of mill oils and drawing compounds usually do not present a problem in adhesion. Most plastics require a simple cleaning before bonding. Some may require abrading for optimum performance.
